Mitel SX200

[jonsjacks]

HELP!
I've got a SX200 that crashed. The 2nd digital card has line 5 and 10 on. The 3rd digital card has line 6 and 8 on. The Bay card TX & RX are dim and alarm light is on. The LED lights show E above and 8 below. The Superconsul 1000 and phones are dead. Can someone help me????

 

[paterson]

The E8 code show up on the LED display of the Main Control Card and will not go away until the licensing in FORM 4 matches the System ID.

On a working system you might see 1 4 or 2 5 or something like that. This would indicate that the last alarm was generated by a device in bay X/card slot Y. If you see - -, that means that there have been no alarms.


_______________________________________________________________

If you did not take enough time to get it right the first time...

What makes you think that you have time to fix it?

 

[jonsjacks]

Life gets better every day. We got the system up and running. Calls come in, calls go out, it good. We had to prgm from scratch. The card was left in the BAY. But it is wiped out. i need to find someone to dial into the system to finish the programming eg. page, restrns etc.. Any volunteers?????