Mitel SX 200

[MyDogTippy]

I have a "new" customer (Mitel SX200) that would like to route all the calls that come into his main console to one of his supersets (ext. 728). I haven't worked on a mitel switch in sometime and pretty much need to know how to program his switch from the beginning. I would really appreciate any help that someone could offer.

Thank you.

 

[cwc3]

which 200 analog , digital, ml , el , icp
rev ? Did you wake up and decide to be the phone man?

 

[MyDogTippy]

200 analog

 

[cwc3]

are you just wanting to make all incoming trunk calls
ring a x 728 instead of a ldn on the console?

 

[cwc3]

your best bet is to go to

http://www.wedophones.com/MitelManualsLead.htm

you most likely have 217 bare minimum you'll
need the overlay or a picture of one in your case
programing sheets and It wouldn't hurt to have all
5 or so vols of manuals since they are free
and then make a giant cup of coffee

also if you have folio you can get the 200 manuals
.nfo's on same web page above and can advanced search the whole edoc like you would
if you are familiar with new mitel line!!