Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mitel Sx 200 EL

Status
Not open for further replies.
vhcl74

vhcl74

IS-IT--Management
Apr 11, 2013
9
MX
Hello To All :)

I have Mitel Sx 200 EL two cabinets join together via fiber link on one of the cabinets (slot 6) I have a T1 card conected to an IPtube and is working without a problem....

My question is: Can I add another T1 card on the second cabinet?? is this supported by the Mitel? or is there a restriction as to how many T1 cards the system can handle?? where can I find out??

by the way the System Identity Code is 24336, I can provide further information if needed.

Thank you guys.
 
Sort by date Sort by votes
The system can handle up to 8 digital links

How many digital link licenses do you have?

**********************************************
What's most important is that you realise ... There is no spoon.
 
Upvote 0 Downvote
Thanks for the reply

Where can I see how many licenses I have??? I have a Mitel feature Options print out and I dont see anything regarding digital links I only see a maximum of 216 user devices, 2 maximun BNIC cards and 1 Maximun BONS cards, is one of this options it???? or is there a Form on the cde that will tell me how many licenses I have???

Thanks

 
Upvote 0 Downvote
Hi

I browse trught form 4 and I didnt see any option that says "number of link" or a 96 Option number from option 80 it skips to 100 and in the disable option I didnt find it either

The one in use is a T1 DSI TRUNK [1LK] the part No: is 9109 - 021 - 000 - SA

Thanks



 
Upvote 0 Downvote
Yes I do!!

What should I look for on the MOS Sheet?

thanks
 
Upvote 0 Downvote
You said earlier that you did not see any options between 80 and 100

Here is what you should see:

[tt] [80] MyAdministrator N
[83] Internet Gateway N
[84] Guest Suites N
[85] Speak@Ease N
[86] PRI Card Q.SIG Y
[87] Record A Call Y
[88] Maximum TAPI Desktops 0
[89] CLASS Sets Y
[90] ACD Real Time Events Y
[91] PRI Card NFAS N
[92] PRI Card D Chan. Backup N
[93] PRI Card RLAN Access N
[94] PRI Card Min/Max N
[95] PRI Card Auto Min/Max N
[highlight #FCE94F][96] Maximum Digital Links 1[/highlight]
[97] Voicemail Softkey Access Y
[98] 3/4DN, 400 Sets (ICP only) N
[99] Fax Tone Detection Y
[/tt]

**********************************************
What's most important is that you realise ... There is no spoon.
 
Upvote 0 Downvote
Here is what I see on the MOS Sheet

System Identity Code (Option 101): 24336
Mitel Options Password (Option 100): 0806xxxx

----------------------------------------------------------------------------------
Part Number: Option: Mitel Feature Options:
----------------------------------------------------------------------------------

9109-532-001-na 106 Automated Attendant ................... [N]
.
.
.
.
.
here a have a few rows but none is option 96

then on the second half of mod sheet I have something like this

Part Number Option: System Resource Configuration
__________________________________________________________________________________________________

NO DTL 96 Maximum PRI Cards Links: 0


Is this it?

I can scan the moss sheet and email it if you like to clarified this.

Thanks


 
Upvote 0 Downvote
Here it is

12:17 PM 18-APR-13 alarm status = NO ALARM

+----------------------------------------------------------------------------+
¦ System Options (Displaying ENABLED Options) ¦ STATUS ¦ OPTION NUM ¦
+--------------------------------------------------+----------+--------------¦
>¦ Verified Account Codes ¦ ENABLED ¦ 05 ¦<
¦ Incoming to Outgoing Call Forward ¦ ENABLED ¦ 21 ¦
¦ Last Party Clear - Dial Tone ¦ ENABLED ¦ 22 ¦
¦ Telephone Last Number Redial ¦ ENABLED ¦ 29 ¦
¦ Calibrated Flash ¦ ENABLED ¦ 37 ¦
¦ Switch-Hook Flash ¦ ENABLED ¦ 38 ¦
¦ ACD Silent Monitoring ¦ ENABLED ¦ 42 ¦
¦ Digit Translation Plan 0-3 ¦ 0 ¦ 46 ¦
¦ ARS Unknown Digit Length Time-out 2-60 seconds ¦ 5 ¦ 47 ¦
¦ Limited Wait For Dial Tone 1-15 seconds ¦ 5 ¦ 48 ¦
¦ Pseudo Answer Supervision Timer 10-60 seconds ¦ 20 ¦ 49 ¦
¦ Dialing Conflict Timer 2-10 seconds ¦ 5 ¦ 50 ¦
¦ Final Ring Time-out 1-30 minutes ¦ 1 ¦ 51 ¦
¦ Minimum Flash Timer 20-50 ms ( 10 ms inc ) ¦ 20 ¦ 52 ¦
¦ Maximum Flash Timer 20-150 ms ( 10 ms inc ) ¦ 100 ¦ 53 ¦
¦ DISA Answer Timer 1-8 seconds ¦ 8 ¦ 54 ¦
¦ Account Code Length Variable or 4-12 digits ¦ 6 ¦ 55 ¦
¦ Auto Room Status Conversion/Wake-up Print timer ¦ 00:00 ¦ 56 ¦
¦ Vacant/Reserved Room Default Call Restriction ¦ INTERNAL ¦ 57 ¦
>¦ Occupied Room Default Call Restriction ¦ INTERNAL ¦ 58 ¦<
¦ Receivers Reserved For Non-Auto-Attendant Use ¦ UNKNOWN ¦ 59 ¦
¦ Tone Plan ¦ NA ¦ 60 ¦
¦ Class Receivers in Spine Bay #1 (0..5) ¦ 3 ¦ 61 ¦
¦ Class Receivers in Spine Bay #2 (0..5) ¦ 3 ¦ 62 ¦
¦ Class Receivers in Spine Bay #3 (0..5) ¦ 3 ¦ 63 ¦
¦ Class Receivers in Spine Bay #4 (0..5) ¦ 3 ¦ 64 ¦
¦ Class Receivers in Spine Bay #5 (0..5) ¦ 3 ¦ 65 ¦
¦ Class Receivers in Spine Bay #6 (0..5) ¦ 3 ¦ 66 ¦
¦ Class Receivers in Spine Bay #7 (0..5) ¦ 3 ¦ 67 ¦
¦ DSP DTMF Receiver Channels (0..7) ¦ 7 ¦ 68 ¦
>¦ DTMF ON Timer 5-15 ( in 10 ms inc ) ¦ 9 ¦ 69 ¦<
¦ DTMF OFF Timer 5-15 ( in 10 ms inc ) ¦ 9 ¦ 70 ¦
¦ Mitel Options Password ¦ 08061584 ¦ 100 ¦
¦ System Identity Code ¦ 24336 ¦ 101 ¦
¦ System Type (ML,EL) ¦ EL ¦ 102 ¦
¦ Class Receivers in Spine Bay #7 (0..5) ¦ 3 ¦ 67 ¦
¦ DSP DTMF Receiver Channels (0..7) ¦ 7 ¦ 68 ¦
¦ DTMF ON Timer 5-15 ( in 10 ms inc ) ¦ 9 ¦ 69 ¦
¦ DTMF OFF Timer 5-15 ( in 10 ms inc ) ¦ 9 ¦ 70 ¦
¦ Mitel Options Password ¦ 08061584 ¦ 100 ¦
¦ System Identity Code ¦ 24336 ¦ 101 ¦
¦ System Type (ML,EL) ¦ EL ¦ 102 ¦
¦ Maximum Devices ¦ 216 ¦ 103 ¦
¦ Maximum ACD Agents ¦ 0 ¦ 104 ¦
¦ Maximum BNIC Cards (2..40) ¦ 2 ¦ 110 ¦
¦ Maximum BONS Cards (1..40) ¦ 1 ¦ 111 ¦
>¦ SS4000 Series Sets ¦ ENABLED ¦ 112 ¦<
+--------------------------------------------------+----------+--------------¦
¦ SS4000 Series Sets ¦ ENABLED ¦ 112 ¦
+----------------------------------------------------------------------------¦
¦1-DISABLE ¦2- ¦3- ¦4-TOP ¦5-BOTTOM ¦
+---------------+--------------+--------------+--------------+---------------¦
¦6-QUIT ¦7-OPTION NUM ¦8-SHOW DISABLE¦9- ¦0- ¦
+----------------------------------------------------------------------------+
 
Upvote 0 Downvote
sorry to be a pain but can you print the disabled features? Digital links I would have thought would have printed in the enabled ones.
 
Upvote 0 Downvote
Not a problem! here you go

12:48 PM 18-APR-13 alarm status = NO ALARM

+----------------------------------------------------------------------------+
¦ System Options (Displaying DISABLED Options) ¦ STATUS ¦ OPTION NUM ¦
+--------------------------------------------------+----------+--------------¦
>¦ 24 Hour Clock ¦ DISABLED ¦ 01 ¦<
¦ Message Lamp Test Enable ¦ DISABLED ¦ 02 ¦
¦ Single Paging Amplifier ¦ DISABLED ¦ 03 ¦
¦ Message Waiting & Message Register Clear Print ¦ DISABLED ¦ 04 ¦
¦ Analogue Networking SMDR ¦ DISABLED ¦ 06 ¦
¦ Cancel 24-hour Message Waiting ¦ DISABLED ¦ 07 ¦
¦ Five Digit SMDR ¦ DISABLED ¦ 08 ¦
¦ Attendant Call Block ¦ DISABLED ¦ 09 ¦
¦ Attendant Conference Beeps ¦ DISABLED ¦ 10 ¦
¦ Automatic Wake-up ¦ DISABLED ¦ 11 ¦
¦ Automatic Wake-up Alarm ¦ DISABLED ¦ 12 ¦
¦ Automatic Wake-up Print ¦ DISABLED ¦ 13 ¦
¦ Automatic Wake-up Music ¦ DISABLED ¦ 14 ¦
¦ Data Demultiplexer ¦ DISABLED ¦ 15 ¦
¦ Discriminating Ringing ¦ DISABLED ¦ 17 ¦
¦ Discriminating Ringing Always ¦ DISABLED ¦ 18 ¦
¦ Holiday Messages ¦ DISABLED ¦ 20 ¦
¦ Message Reg. Count Additional Supervisions ¦ DISABLED ¦ 23 ¦
¦ Message Register Audit ¦ DISABLED ¦ 24 ¦
>¦ Message Register Zero After Audit ¦ DISABLED ¦ 25 ¦<
¦ No Overlap Outpulsing ¦ DISABLED ¦ 26 ¦
¦ Room Status Audit ¦ DISABLED ¦ 27 ¦
¦ SMDR Indicate Long Calls ¦ DISABLED ¦ 28 ¦
¦ Satellite PBX ¦ DISABLED ¦ 31 ¦
¦ Outgoing Call Restriction ¦ DISABLED ¦ 32 ¦
¦ Room Status ¦ DISABLED ¦ 33 ¦
¦ Auto Room Status Conversion/Auto Wake-up Print ¦ DISABLED ¦ 34 ¦
¦ End of Dial Character ( # ) ¦ DISABLED ¦ 36 ¦
>¦ DATA SMDR Indicate Long Calls ¦ DISABLED ¦ 39 ¦<
¦ Message Register Follows Talker ¦ DISABLED ¦ 40 ¦
¦ ACD Silent Monitoring Beeps ¦ DISABLED ¦ 43 ¦
¦ ACD Reports ¦ DISABLED ¦ 44 ¦
¦ Fax Tone Detection ¦ DISABLED ¦ 99 ¦
¦ Mitel Application Interface ¦ DISABLED ¦ 105 ¦
¦ Automated Attendant ¦ DISABLED ¦ 106 ¦
¦ Lodging ¦ DISABLED ¦ 107 ¦
¦ Property Management System ¦ DISABLED ¦ 108 ¦
¦ Remote Software Download ¦ DISABLED ¦ 109 ¦
>¦ Centralized Attendant/VoiceMail ¦ DISABLED ¦ 113 ¦<
+----------------------------------------------------------------------------¦
¦1-ENABLE ¦2- ¦3- ¦4-TOP ¦5-BOTTOM ¦
+---------------+--------------+--------------+--------------+---------------¦
¦6-QUIT ¦7-OPTION NUM ¦8-SHOW ENABLE ¦9- ¦0- ¦
+----------------------------------------------------------------------------+



Thanks!!!!
 
Upvote 0 Downvote
I have never seen this:

NO DTL 96 Maximum PRI Cards Links: 0

I think you have T1 trunk which is 24 trunks not ISDN. If you have slot 11 in the control cabinet spare you can use it, it programs to slot 6 so it would have to be vacant.
 
Upvote 0 Downvote
Ok I have 2 cabinets so I can use 2 T1 Trunks 1 per cabinet.. Thanks
 
Upvote 0 Downvote
that is what I think but maybe someone else can jump in here and confirm.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

sadic
  • Locked
  • Question
SX-200 EL LW19
Replies
3
Views
224
jpruder
jpruder
idahomitel
  • Locked
  • Question
SX 200 ICP CFNA and xfer problems
Replies
18
Views
795
The mitel guy
The mitel guy
The mitel guy
  • Locked
  • Question
Mitel sx-50 911 routing still dosen
Replies
1
Views
182
kwbMitel
kwbMitel
ctamir
  • Locked
  • Question
mitel 6920 sip
Replies
1
Views
710
HAPE67
H
H
  • Locked
  • Question
Mitel YSE
Replies
2
Views
977
Billz66
Billz66

Part and Inventory Search

Sponsor

Back
Top