Mitel SX-200 call forwarding

[rm30680]

Hello,

We are replacing an old Mitel SX-200 system at a client with a Asterisk VoIP solution. As part of our process, we forward the telephone numbers to temporary numbers until the number port to our system is completed.

If anyone has any instructions or can walk us through the process on the Mitel system on how to activate the call forwarding (to another phone number), that would be appreciated. We are willing to pay for the assistance.

Regards

Richard

 

[7deedtz]

where are you from? Country and town?

Mitel, Avaya, NEC, INDEX

http://www.vcs-sa.co.za

 

[rm30680]

Calgary Alberta, Canada

 

[kwbMitel]

The 200 needs to forward to a speedcall if the destination is external

The COS of the trunk must allow Trunk to trunk connections (313-319 range)
the COS of the station must allow external forwarding
Form 30 must allow trunk to trunk connections

(Howdy from 300Km north)

**********************************************
What's most important is that you realise ... There is no spoon.