I am using a Cisco Catalyst 3750X switch on a Mitel system that is not resident to the office. We are using a 3rd party to switch our calls. I can plug the Mitel phones into an unconfigured switch and get an IP address. If I configure the port for a Voice VLAN the phone does not get an address. If I use option 43 or 125 where do I get the sw_TFTP and call_srv addresses from, since we do not have a phone system in the office?
The phone gets an address with VLAN 1 but not with the voice VLAN.
The phone gets an address with VLAN 1 but not with the voice VLAN.