We recently migrated several of our phones to a variety of IP devices (5212/24 5340/60). We purchased a 5310 unit last week. Can this unit be field deployed with out the side control unit? Also, can this unit be powered by POE switches as opposed to a power supply?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mitel 5310 question/help
- Thread starter tilos
- Start date
5310 is the designation of a phone with an attached side unit. The type of phone involved depends on the age of the side unit. A phone without a side unit is just that, a phone. All requirements to run a phone apply.
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
- Thread starter
- #3
The answer is different depending on the type of unit. The older units need direct power.
The newer units, with the module installed in the back of the phone, do not.
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
The newer units, with the module installed in the back of the phone, do not.
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
- Status