Mitel 5000 in Australia 1

[tech1302]

Hi

Is anyone here from Australia please ?
I`m going to install a Mitel 5000 in Ausi and wants to know some details.

1.Would a 5000 CS/HX work over there
2.Would the on board Analog ports work with the lines
3.Would a T1/E1, BRM cards work with the digital lines over there

I will be setting the system up in the UK.

Thanks in advance.

 

[sarond]

Australia has had the 5000/MiVO250 since aboutn 5.1SP3.
Only HX controller and no DEI supported.

As long as you have the latest release it will be fine.

Analog trunks are OK but they don't release well with trunk to trunk transfer
E1 and BRI are fine.

Just use the Australian DB and you should be good to go. Numbering plan is a little different to the UK and US.