Mitel 3300 NSU E1 has noise no dial tone

[deinterlect]

I am having some trouble programming an E1 NSU. Right not i am able to dial and receive call. However when the receiver is picked up all i get is noise on the line. Does anyone have any basic settings for programming the NSU

 

[deinterlect]

Forgot to mention this is an R2 E1

 

[kwbMitel]

On the NSU in NA I usually need to invert the voice encoding in the Link Descriptor or I get noise.

Same solution on E1? you tell me.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[augustD2]

It is the same thing for E1 or T1, for the voice encoding, you have to put either nil or invert.

 

[LoopyLou]

yep

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

 

[deinterlect]

Guys again i must thank the individuals that contribute to this forum. I was able to get the E1 up and running. Had to make 2 changes.
[ol 1]
[li]I changed the link descriptor to inverted on audio and data as suggested by kwbMitel and p011406[/li]
[/ol][ol 2]
[li]I changed voice compression to ADI[/li]
[/ol]

Again i must say thanks again. This one is closed