Mitel 3300 MXe RJ11 Paging port Pinout? 1

[MortalGod]

Hi Everyone,

We have just installed a 3300 MXe system a few months ago and we are trying to setup the paging port to our PA system...

However we did not get a technicians handbook left with our 3300 and are experiancing difficulties getting one... (next week is the best they can do)

Can anyone with a rev 9.0 3300 handbook tell me what the paging port pinout is.. The connector on the back is a 6pin RJ11 socket

I have seen a few 8 pin rj45 pinouts around on here but not one for a r11 6 pin

Any help would be greatly appreciated

 

[kwbMitel]

The Pin numbers referenced below are numbered left to right while looking at the copper connectors at the top of the RJ11 cable.

1 2 3 4 5 6

1 = Relay NC
2 = Relay Common
3 = Paging Signal
4 = Paging Signal
5 = Paging NO
6 = N/C


*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[MortalGod]

Thanks for the quick reply..