Hello... i bought a mitel 3300 pbx with 4 5215 mitel phones. I have Knowledge in networking but have no idea how to login to the pbx from a windows 10 pc. I tried connecting a straight through ethernet cable on the lan port of the pbx my pc but i can't access the controll panel on the pbx. Please help.. thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mitel 3300 cx
- Thread starter Adjahie
- Start date
techymitel
Technical User
Plug a serial cable into the serial (maintenance) port in the front.
Use PuTTY or another terminal emulator to connect at 9600, 8, N, 1.
You should see the system boot up. Or at least see some messages.
You should see what IP address the system is using in the boot messages.
If you don't, use this command once booted to see what IP address the system is configured with:
Code:
versionYou will have to give your laptop an IP address on the same subnet to be able to directly connect to the CX controller with a browser.
- Status