Mitel 3300 Config

[BillB66]

Is there a way of exporting all form data from a Mitel 3300 MXe Controller in one hit ?
I know I can export most of the pages one at a time but wanted to get the whole lot done quickly ?

 

[TheMitelGuy]

Not that I know of... Of course a backup will also have all pages stored in it.

 

[nytalkin]

You can try this: set up a file capture from the LPR1 tcp port 1754. From the maint screen type "fo all /port lpr1"
Capture the output and print it out when you need it. Keep in mind that this process takes quite some time depending on the size of the configuration.

NO GOOD DEED GOES UNPUNISHED!

 

[MitelInMyBlood]

Formprint ALL[/] ?????????????????????????????????
I remember a guy did that once on a big, multi-cabinet SG about 20-odd years ago and almost got himself fired. Of course back then the job was going to a printer. Formprint is seen by the system as a CDE user and so locks you out of the database all the while it's running.

 

[nytalkin]

I didn't say this is a perfect solution but it works.

NO GOOD DEED GOES UNPUNISHED!

 

[EllisD]

Did you manage to get the formprint /all to work? My 3300 MXe on v8 report reports that this "command is not supported and will be ignored"

Printing out single forms is fine....

 

[BillB66]

Nope I havent tried it as I dint want to disrupt a working system.
I did it the long hard way , one at a time....

When I get a chance I might try it on our demo system .