Mitel 3300 and Linksys PAP2T

[mitelpoep]

Hi All,

I have got a Linksys PAP2T Sip device that is connected to a Mitel 3300 CX Controller. The Device works fine with internal calls between the Device and Mitel IP Phones.

I get an issue when I try and make external calls, where i get 1 way speach and like "robot" speach.

Please help, I have played around with the codacs and so on, but with no luck.

Cheers

Mitelpoep

 

[Mitelmatt]

You need to change the RTP Packet size to 0.0020 (20Ms)