Mitel 3300 5485 IP Paging unit to Valcom V-9940 Page Adapter

[AlaskanPolarBear]

I can't seem to make this work. When I use FAC #7 and the DN of the IP paging unit I can hear a relay click but no audio.

I am trying this set up on my lab system before I go install it at the customer location.

Any ideas???

 

[bribob]

If you connect a butt set to pair 9, after the 'click', do you hear any audio?

Is #7 your FAC for Direct Page?

What happens if you put the Paging unit DN into a Page group and then Direct Page to the page group?


-b

 

[AlaskanPolarBear]

Yes that does work.

I have it working in the lab now. Next step is to make it work on the customer network with a VLAN.

I read that LLDP doesn't work and I have to use DHCP with option 125.

 

[kwbMitel]

Not only does LLDP not work but you almost always require options 128, 129 and 130 for the initial connection until the unit upgrades its firmware and becomes aware of option 125.

These units are 5010 phones basically and do not know about option 125 out of the box.

**********************************************
What's most important is that you realise ... There is no spoon.