I have a customer with a 200 ICP AX v5.0.2.3. The system is reporting a Major Alarm. When I review the logs, I see the following errors: "Power supply 2 removed", and "Power supply 2 is not seated properly." The system only has one power supply installed. Rebooting the system makes the alarm go away for a few days, but it always returns. Is there something I need to disable or turn off since that second unit is not installed?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mitel 200 ICP Power Supply 2 Error
- Thread starter VLSTECH
- Start date
pandabear1
Technical User
my first thought would be upgrade to the latest 5.0.2.12, I have this software and only one PS and no problems at any of my sites.
- Thread starter
- #3
pandabear1
Technical User
if you have access to Mitel on Line (MOL) the download is free
- Status