Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Missing TSAxxx for SBACKUP 1

Status
Not open for further replies.

TechCoordinator

Technical User
May 8, 2003
11
Hello, I have found all the NLM's except the TSAxxx one. I am running NetWare 6.5 and wanting to use SBACKUP.
Can you help me find this TSA? Thanks a lot. TechCoordinator
 
The file you are looking for is TSAFS.NLM, and should load when you run SMSSTART.NCF.

Just FYI, it used to be TSA500 (for NEtWare 5.0), TSA600 (For NetWare 6.0), but with NetWare 6.5 they changed it to TSAFS.NLM, then made that module compatible with 6.0 as well. It's supposed to add some additional features and performance, although that could certainly be debated.

Marvin Huffaker, MCNE
Marvin Huffaker Consulting, Inc.
A Novell Platinum Partner
 
Thank you, the TSAFS.NLM loaded OK & I hoped that was the problem. My SBACKUP job still gets an error status of 'Could Not Run' immediately after starting.
I have a feeling it is my meadia header (D1 SONY Tape) or
my tape device name [V321-A3-D5:0] Compaq_SDT-9000.
Also I do not know what to setup for Session File Options.
Is a 'session' file the data backup file(s)?
Thanks for any help. Techy
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top