Missing REL2 after swap of flashdisk (TSW) 2

[runlun]

Hi

Hope someone can help

I have swapped flash-disk on NIU2-card, and followed the procedure for this, and using the commands for unmounting and mounting file system
But something has gone wrong, when trying to run DUSYI, the following appears:
<dusyi;
SYSTEM DUMP INFORMATION
NOT POSSIBLE TO DUMP CHANGED PROGRAM CODE
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE
SUCCESSFUL
WAIT FOR DUMP TO LOCAL BACKUP
RESULT OF DUMP TO LOCAL BACKUP
SUCCESSFUL
RESULT OF EXTERNAL BACKUP UPDATE


FILE/DIRECTORY DOES NOT EXIST 13:30 17JAN17
FAILED FOR DIRECTORY REL2

I do not know how to solve this, maybee someone can help me

Regards
RunLun

 

[inlsp05]

BLEQI
fimoe
iosie
iosii
ficri
FICRI
FIMOI
BLEQE

 

[runlun]

Thanks inlsp05

Problem is when using fimoi for syssubfs12, se below

<fimoi:subfs=syssubfs11;
EXECUTED

<fimoi:subfs=syssubfs12;
NOT ACCEPTED
UNREASONABLE VALUE
PATH

RunLun

 

[vkrt]

/* Bloking board IPU (SCSI) initiate */
BLEQI:EQU=1-0-60-0;@/EXECUTED/
/* File system mount end */
FIMOE:SUBFS=SYSSUBFS11;@/EXECUTED/
FIMOE:SUBFS=SYSSUBFS21;@/EXECUTED/
/* Input output SCSI device end */
IOSIE:NODE=SYSN,IODEV=SYSDISK1;@/EXECUTED/
/* */
/**************************************/
/*---------------Mount:---------------*/
/* */
/* Input output SCSI device initiate */
IOSII:NODE=SYSN,IODEV=SYSDISK1,SUBFS=SYSSUBFS11&SYSSUBFS21,BTYPE=ATA;
FLASH

/* File system creat initiate */
FICRI:SUBFS=SYSSUBFS11,SIZE=60; (SIZE=60 (for FLASH));
Y;@/EXECUTED/
FICRI:SUBFS=SYSSUBFS21,SIZE=60; (SIZE=60 (for FLASH));
Y;@/EXECUTED/
/* File system mount initiate */
FIMOI:SUBFS=SYSSUBFS11;@/EXECUTED/
FIMOI:SUBFS=SYSSUBFS21;@/EXECUTED/
/* Bloking board IPU (SCSI) end */
BLEQE:EQU=1-0-60-0,ALLFM=YES;@/EXECUTED/
/* */
/*---------------END------------------*/

 

[inlsp05]

hi
RunLun
you wrong is in
fimoi:subfs=syssubfs12
NOT ACCEPTED
UNREASONABLE VALUE
PATH

true is syssubfs21
also you have niu-2 so you most put btype=ATA in iosii

 

[runlun]

Hi

Oops, I should have noticed this, especially when I tried several times

Sorry guys, thanks anyway for replying

RunLun