Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

missing range of extensions

Status
Not open for further replies.
Nov 4, 2016
18
US
We recently purchased a range of DID's 6600-6699

When i do a LUDN, the 66, and 6600-6699 extensions are not listed.

What do i do in order to A. Find why this range is not available, and B. Make this range available?
 
ok, so looking at this, i see that 66 is being used as a coordinated dialing plan. I do not have any additional PBX's tied into this switch however there may have been one in the past under previous company ownership.

Is it possible to Out a CDP, and if i do so, will that make the range available as extensions?
 
Yes, you can OUT this CDP in LD 87 and then you should have all extensions starting with 66XX available.
 
When i outed this, it gave me 66 in the LUDN, but not the rest of the range.

i did locate this
DSC 66
FLEN 0
DSP LSC
RLI 12


Which is pointing the DSC of 66 to RLI 12 which is an old Sip Tie trunk that we no longer use. So now it looks like i need to remove this trunk, but i want to be 100% certain that it's not in sure anymore.
Not certain what the next step is.
 
If you are sure that your pbx is not connected to any other outer pbx or SIP trunk ..then just out this 66 DSC to get the extension range .
 
Create a dummy DN of 6601 on a spare TN ..and then print the LUDN.. wether you become able to find the range..
 
OH!!!!!!
ok. so when i added 6601, it actually let me. and then the range of 6601-6609 showed up in the ludn. So basically i just had to add a number in each of the 10's block of the 6600 series, and it opened them all up.

Thank you everyone!
 
Hi...i am a new user here. Just upgraded from 1.5.6.1 to 2.3.0.2 and trying to manage some extensions, and install a theme, but the EXTENSIONS tab is missing on my admin dashboard ??
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top