jerryd3001
Technical User
I have a 30GB WD set as Master and either an 8.4 GB WD or 60 GB WD set as slave (as removable drives) on an AMD 1700+ machine with AWDFLASH Bios and Epox 8KHA+ DDR motherboard. The bios recognizes the drives perfectly, and I can copy partitions using Data Lifeguard from the diskette, but when I get to Windows ME, the drives are reversed and the slave is mislabled (both with the same label as the master). The computer always boots to the slave (or won't boot to the new 60 GB drive if it is set as slave since it is only partitioned and formatted, which was done by configuring it as the master with no other drives connected). I have tried every possible cable and jumper configuration, always with the same results. Any thoughts or suggestions. Thanks in advance. Jerry