Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MIS 0x32 ringing

Status
Not open for further replies.

brmgr

MIS
Aug 22, 2013
7
US
Folks, I have two M7310's ringing @ the same time when ever you dial either number (223 & 233); I have looked in ANS DN's, ring groups. hunt groups and the like. What did this 'ole retired phone guy forget please? Suggestion(s) would be greatly appreciated. Thanks!
 
Maybe you can give us some more clues:
[ol 1]
[li]When a set is ringing, there is a message on the display. What is this message? Is it the same on the other set?[/li]
[li]Also, when a set is ringing, there is an indicator flashing. If you press Feature * 0, then the button next to the flashing indicator, what appears on the display? Is it the same on the other set?[/li]
[/ol]
 
Folks, internally the caller ext appears in the window; didn't try external incoming and yes I checked CFNA and CFB; both set to voicemail on ext 236.
 
It sounds like port mapping corruption... reboot the MICS.

Marv ccna
Sales, Installation & Service for Norstar, BCM & Allworx
Serving Ottawa and Eastern Ontario since 1990
 
Also look for Answer DN keys and that the sets are not looped together (have their own pair to KSU).


=----(((((((((()----=
curlycord

small-logo-sig.png

Toronto Canada
 
All, I'll check over the weekend; I don't want to take the system down during business hours (HIGH CAP?). I'll check for a multiple pair scenerio as well. Thnaks folks. Will let you know what happens......next week.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top