Miran TUI Can't Log In

[TD22]

I have just installed an older version Miran Card. I have the MOH working now I want to record some RAN through the TUI.I access the card through TUI ACOD and I'm prompted for password, none of the documented passwords work.

I have tried #admin* admin000# and #user* user000#
I have also tried 4 zeros insted of three.

When I access the card with my laptop it was 4321 that worked as a password. Just wondering if there are other passwords to try for older cards. Or better yet am I missing something in my process.

Thanks,

TD

 

[johnpoole]

try 000000.. that was the default at one time, what version are you using?

john poole
bellsouth business
columbia,sc

 

[TD22]

Hi John,

I have a card that reads version 1.56 release 9.

I tried the 000000 and that didn't appear to work

Thanks,

 

[janchundia]

4321 works in the TUI interface for all MIRAN cards.

 

[janchundia]

4321 works in the TUI interface for old MIRAN cards.

 

[TD22]

Hi Janchundia,

Once prompted with "Please enter your password followed by number sign" I entered 4321# and all I hear is silence, like waiting for more digits. So if I enter a few more digits and another # sign I get "login incorrect please try again" recording.

Thanks

 

[techman3030]

You must enter the # twice at the end of the password.
4321## this should work.

 

[janchundia]

right 4321##

 

[TD22]

Tried 4321## and it didn't work seems like not enough digits as it is dead air after entering. I checked some other threads and admin## 4321## was suggested. This didn't
work either.

 

[techman3030]

sometimes if you hit an extra # it will work. your set pass will be the same as your terminal pass. I have an older and a newer rls and when I do set based admin on the old one I sometimes have to hit the # key 3 times as it doesn't seem to take and I get the dead air treatment like you are now. also try it on another phone just in case your # key is sticky.

 

[janchundia]

which is the version for your card ?

 

[TD22]

I have version 1.56 release 9


I tried 4321### from other phones and I got the login incorrect recording. Any chance someone changed the default

 

[janchundia]

If you enter the incorrect password after three attempts, the system lock you out.

Pull out the card and insert again. When finished the reboot, try again 4321##


Javier

 

[TheWorkingMan]

I think that there is a patch for DTMF tones to the miran from external numbers (PBX patch). Not sure if this would be the same issue.


TWM

 

[mikeet]

Look at your RDB and see if you have MANO yes.

mikeet

 

[TD22]

Thanks mikeet I changed to MANO yes and it worked. I feel pretty stupid as I knew this was supposed to be yes.
Sorry for bothering everyone and thanks for responding.