Miran file format help

[Mlck]

Hi all

This is my first Miran installation, I follow the book, I create the Ran route, trunks for chanels and now I<m stuck at the wave file import.

I always get this message
Command : CAL_ADD 0 A:AMONO.WAV ALWAYS
Error : Invalid Filename Extension - must be .MCF, .ALW or .MLW

I tried those format
.wav ulaw mono
.wav ulaw 64bit
.wav alaw mono
.wav alaw 64bit
.wav 8k mono

What im suppose to use to get those format, .MCF .ALW .MLW

thanks

 

[bigindian65]

64 k
8 bit
1(mono)
8 khz
u-law

I would go to the convert file cmd once in the format above

Mato' Was'aka

 

[Firebird Scrambler]

Try a program such as Goldwave for file conversions.

To download the MOH to the MIRAN card do the followings:


1- Convert the music file which the customer provides on e.g. a CD to:

Bit rate: 64 kbps
Auto sample size: 8 bit
Channel: 1 mono
Audio sample rate: 8 KHZ
Audio format: CCITT A-Law


I use program "GoldWave" to do that.

Save the file as example: May_Hold (name must be less than 8 characters)

In Goldwave, select the Attributes tab as.. A-Law, 8000 Hz, 64Kbps, mono


2- Transfer the file to the PCMCIA flash card with a size of 64 mb or 128 mb


3- Connect your laptop to the MIRAN card so please take the appropriate cable. You can browse to the card but I never used this way. See the info of how in the attached doc.


All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[Firebird Scrambler]

Here is the rest below.

4- Using "Procom plus" or "HyperTerminal" access the MIRAN 2 or 3 card by pressing shift~


5- username: admin & Password: xxxxxxxx


6- Choose:

1- MIRAN Administration

2- Announcement Configuration

4- Convert Announcement file

Browse to file A:May_Hold which you put on the flash card

Choose the file by pressing S

Now we want to convert this file to PCM so

In the file name field put C:May_Hold …then

Convert WAV to PCM

5- Calendar Operation

6- Calendar Assignment with Descriptor

You 'll see

DSP000 user

DSP001 ???


Choose DSP000 by pressing S key


File name: browse to C:

Choose your file name example: May_Hold


Browse Descriptor/ always

Add to Calendar

7- Delete Calendar Assignment for the previous month I think the file is: April_Hold



Choose 000 and Delete by choosing D

8- View Calendar assignment and you should see the new file assigned



All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[Mlck]

Thanks all,good explanation, I was on the good way with Goldwave, I found the right format like you explain and I convert with the convert tool in the MIRAN card option.

I think I chosed a wrong format type at my firsts try.

thanks again

It's working now