Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mini says Inactive Feature

Status
Not open for further replies.

AMDMaine

IS-IT--Management
Jun 4, 2007
7
US
CAn you help. CICS 4x8 with StarTalk Mini. Dial any feture code and it says "inactive feature
 
reboot...if still nothing i would say throw away and replace with a cp100
 
Does it sound like the hard drive is running? Or does the hard drive sound noisy? These have so much age on them I'd guess the hard drive has bitten the dust. They can be repaired, but you might consider going with a Startalk Flash instead.

Brian Cox
 
Before you give up on it completely, try pressing feature 9*1 from system phone. If that doesn't get you back in, try rebooting the phone system and vm together.
 
kriegerx5 please start a new topic or visit FAQ tab for how.
Thanks

AMDMaine if F983 asks for password then your system has defaulted, if you see nothing then it has connection issues with the KSU or hard drive failure.





 
If we're talking about the mini Flash, it has no hard drive.

Phonehed in Dallas
 
No such thing as mini flash...its a Mini or its a Flash.
Mini has a hard drive where the flash does not hence the name.


 
I have problem with flash talk which shows inactive features 981,982,983. If I dial the extension, some time the VM will ring and no answer, then even the extension shows not in service. Was tested out with the same 6/16 DR5 and was working. Any suggestion? wires OK, Pair directly connected outside QCB to make sure QCB is not problem.
HH
 
It sounds like it needs to be initialized to the system. Press f903, then f9*1, then f983 and configure.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top