Just installed a Mini Carrier Remote and I cannot get it to come up. Verified that the p2p T1 is good with some loopback plugs. I have the DIP switches on both cards done. What else do I need to do for programming to get these cards to come up? And I did program one phone on the first card slot.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mini Carrier remote won't come up
- Thread starter khaman
- Start date
- Thread starter
- #2
smokinjoe2938
Programmer
its the same thing is two pcs are networked together, transmit to receive/receive to transmit
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
- Status
Similar threads
- Locked
- Question
