Migrating from PIX to ASA? 1

[Gardener1]

I have been tasked to replace the Cisco PIX firewall with the Cisco ASA 5510. Someone told me that I could covert my current running config over to the ASA he said that I would have to do this because some of the cli commands have change and need to be converted so that the ASA can read it.

Does anyone know where I would get the tool to do this, I also need the documentations for this process.

Thanks in advance,

 

[unclerico]

Take a look here:

http://www.cisco.com/en/US/products...s_configuration_example09186a00808554ed.shtml

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)

 

[Gardener1]

On another note while we plan for the new 5510 migration I need to install a 5505 at a remote site in Mexico and need to know if I plug the 5505 in at the remote site and use the vpn wizard to create the site-to-site VPN will I have to make any changes to the PIX in order for this to work? or can I just plug in the 5505 and use the wizard to create the VPN.

 

[hinesjrh]

It will require config. on both the current PIX and on the new 5505 in Mexico, but the site-to-site config. is very similar on both PIX and ASA depending on the code level you are running on each.

http://www.cisco.com/application/pdf/paws/67912/pix2pix-vpn-pix70-asdm.pdf

 

[Gardener1]

I tried to follow this document to migrate the PIX to the ASA device, but step one is to Download the PIXtoASAsetup.exe file from the Cisco Software Center and I don't have a logon for this site. if you have a logon can you download PIXtoASAsetup.exe then email it to me?