migrate 406 to 500

[JayNEC]

how tough is it to do? can I take the cfg file and push it into the 500 successfully?

 

[amriddle01]

Yes you can, you just send the config and if you have ports that match i.e a phone 2 or phone 8 and a Dig card in the 500 it will ask which phone card it is (8 or 2) and then it will map the ports to match the 406 config.

ACS - IP Office Implement

 

[amriddle01]

Have done it several times and it works great, in case you were wondering if you put a phone 8 in the system will add extra numbers on the extra 6 ports (compared to the 406v2) it will not move the numbers from where Dig ports were in the 406.

ACS - IP Office Implement

 

[polarity]

What about a 412 into a 500?

 

[amriddle01]

Never tried that one, check the Docs I'm sure they have thought of it and made it work.

ACS - IP Office Implement

 

[RTGDFM]

You could always export parts of the config as a csv and import the different parts if it wont take the full config.

ACS IP Office Implement
ACA IP Telephoney Implement