MICS XC4.1

[telllman]

I have a system that seems not to be keeping correct time. We can reset the time to be correct then after 10 minutes its off again by 10-15 min. After 1-2 hours its ahead by 2-3 hours.

The client has some new Telco supplying his lines he is not with a Bell company???

Any ideas...

 

[PERRYPJ]

Change the param from Telco time to system time, the new vendor has the wrong time

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[exsmogger]

Look under System Programming - Feature Settings and toggle Auto Time&Date to N.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[telllman]

I have never seen this option is it on the older stuff may that be why. Just looked on my bcm system in office not an option ??

 

[exsmogger]

BCM's are usually set to sync their time from an Internet server, so you wouldn't see that option in set programming. My BCM50 doesn't show that option either, but my test MICS does.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[curlycord]

In BCM it is called "Trunk"

On a MICS there is only one option with yes or no
On BCM there is 3 options (NTP, Trunk, Manual), so you seletc an option rather than Yes or No for only one option.

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[telllman]

Got it many thanks >>>>