Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MICS XC TM line numbers 1

Status
Not open for further replies.
fromill

fromill

MIS
Jul 26, 2002
150
US
I have an MICS 032 with XC software. What do the trunk numbers start with on the trunk module? It is connected to port 12. I programmed the trunks on the MICS 032 1-4 and 25-28 with no problem but can not find the trunks on the trunk module.
Thank you.
 
Sort by date Sort by votes
Trunk modules cannot be plugged into the second fiber expansion card (on the left) - it is for station modules only.
The first trunk module should be plugged into module 8 (the top fibre port on the right) and the next four lines would be 049 to 052.
 
Upvote 0 Downvote
That fixed the problem. Just about finished installing the system now. Thanks.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
514
curlycord
curlycord
telephonesteve
  • Locked
  • Question
Line Redirection - Different lines redirected to different numbers?
Replies
2
Views
287
telephonesteve
telephonesteve
Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
304
curlycord
curlycord
jsaad
  • Locked
  • Question
MICS GATC going dead 4
2
Replies
24
Views
504
curlycord
curlycord
Michael OConnor
  • Locked
  • Question
Norstar MICS Extension Call Forward External 4
Replies
12
Views
351
ttEstiNg2023
ttEstiNg2023

Part and Inventory Search

Sponsor

Back
Top