MICS with T7316E "Appr Only" rings anyway

[TommyT]

On only ONE phone (ext 226), and only on line 5 (L031), the phone is set to "Appr Only" but it rings anyway.
Swapped out phones - problem stays with ext 226. All other 20 extensions have no problem - if they're set to any setting, they do as set.
Just one extension, 226, line 5 rings. The only way to stop it ringing is set to "Unassigned". I can't find other instances of this problem, so please let me start a new thread here. Thank you.

 

[curlycord]

Under Lines check to see what the Prime set equals for each line.

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[TommyT]

Thanks so much for the quick reply.
There is only one Hunt Group: 739.
No lines are assigned to it.
All Line assignments = Unassigned
So there is no Prime set for any line.
Still stumped.
Thanks

 

[allworxguy]

DRT to PRIME change to No.

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990

 

[Sam173]

if that does not work, just copy a working set to 226, may solve that quickly

 

[TommyT]

Thanks very much for your responses.
I will try the copy method if nothing else works, but at 64 I find solving puzzles teaches & develops.
Gone for a week.

 

[cook1082]

Move to different port?