MICS RESET Question

[telllman]

I have a used MICS 6.1 with PRI Card from a old site- I need to install it tomorrow on a system down site... The previous client did a reinstall on it so all the programming seems to be gone. Will this effect the PRI License for the card- also how do you tell if card is showing in system- the green light seems to be flashing ??? I cant test any PRI till on site tomorrow night...

 

[curlycord]

If you can change the card to PRI in hardware your good to go.

________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[telllman]

Thanks for the help- could you tell me the way to do this please- have not done PRI for many years/...

 

[telllman]

The PRI card is in the right slot on the MICS system

 

[curlycord]

Go into hardware then module then change the card.
Remember top check for FAQ's for answers:

http://www.tek-tips.com/faqs.cfm?fid=1646

________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[number1telecom]

Reinstall typically wipes the PRI keycode. Cheapest place to get a new one with activation that I've found is on eBay.

http://www.number1telecom.com