Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

mics pri caller id

Status
Not open for further replies.
SSGZIGGY

SSGZIGGY

Programmer
Nov 29, 2005
32
US
JUST INSTALLED PRI IN MICS R6.1 AND CALLER ID DIGITS DONT SHOW TILL 4TH RING ARE THERE ANY SETTING FOR ME TO CHANGE?
 
Sort by date Sort by votes
On the sets that the lines are ringing on go to telco under the set programing and set the lines to Y for call ID.Also where the name or number first set called id to y.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

flori1
  • Locked
  • Question
caller id
Replies
2
Views
219
curlycord
curlycord
P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
858
curlycord
curlycord
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
1K
Nortel dino
N
Michael OConnor
  • Locked
  • Question
Caller ID Outputting weird characters
Replies
2
Views
305
Michael OConnor
Michael OConnor
accumatt
  • Locked
  • Question
Caller ID Not Working On Outbound Transfer Via Call Pilot 150
Replies
1
Views
284
accumatt
accumatt

Part and Inventory Search

Sponsor

Back
Top