MICS not routing DID to target lines

[HughRunyan]

I have a MICS that will not route call to target line from a inbound PRI DID It will however send the same DID out over a route on a site to site T1 to a MICS and back and they work fine

This PRI is coming from a vega 400 SIP gateway and I have had problem keeping the T1 up with it set to NT changer it to DMS250 set the gateway to DNS and the T1 seem to be working fine. But the target line no longer work after the change

 

[curlycord]

Do you mean the Target line will not route to the specified DN? at the main site?


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[HughRunyan]

Yes you receive a fast busy and the vega show the MICS disconnect the call