MICS - Assign a DDI number to a Hunt Group? 2

[STick170]

Hello All,
I have just set up a small hunt group for a new department in our office which appears to work as I wanted - if I dial ext551 the 3 phones in the hunt group all ring. What I would like to do now is to re-assign an existing DDI number, 660360 (line 265) which is currently assigned to ext232 to this new hunt group. When I attempted to do this, I couldn't access ext551 from the Terminals and Extensions menu, I guess this is because it is reserved for a hunt group. Am I trying to do the impossible here?

 

[BombOne]

been a while for me, but I think its under the hunt group settings somewhere. there is a spot that says lines, and you can assign it there.

 

[norstarboy125]

You cannot add the line at terminals and sets cause it's a HG DN. You add target lines under HG programming/line assignment.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[STick170]

Thanks guys, you were spot on! Everything is now working just as we needed.