MICS and Startalk flash

[bjones2]

Have a dead older 8x24 DR5 KSU, it had 2 digit DN's and a Startalk flash.
replace the 8x24 with a MICS 4.1 0x32 KSU, 3 digit DN's.
Question: Can the 0x32 KSU be configures with 2 digit extension numbers.
the 0x32 has no combo card installed---or-- how do you convert the Startalk
Flash (2 digit DN's) to work on the MICS 0x32

 

[norstarboy125]

A mics cannot have 2 digit extensions.
The startalk will need to be reinstalled to reset the dn length.
You might want to check the software version of your startalk to make sure it's compatible with your mics before doing anything.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[exsmogger]

Right, the Startalk Flash needs to be V1.9 or higher to be compatible with your MICS.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952