MICS 6.1

[kmpp]

I have a MICS 6.1 CDA XC (SP 30C0G05). The customer reports the time is off by approximately 12 hours, they have corrected
it several times, but it continues to be off, this has been happening for about a week. A reboot is probably in order.
From my experience this usually indicates problems with the software and may have to b replaced. If I do replace the software
I would go to 7.1, I am wondering if I will have to go with CDA XC 7.1 so I can keep current programming and are any issues in
doing this upgrade?
Thanks for any input.

 

[curlycord]

There is Auto time and date in feature settings, what is it set to?
That gets the time from the carrier, whom may have their own issues with their clock.
Turn it off and set the time again, test

Could also be a bad crystal on the KSU.

=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[curlycord]

as for 6.1 to 71 there is no issue.

=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca