MICS 6.1 2port Fiber Expansion to 6 port ????

[jpwalsh]

Can anyone give me some help on this one??

Have an MICS 6.1 with a 2 port fiber expansion card need to have 1 trunk module currently in the 4 position; need to add an additional trunk module and station module but I need to change out the fiber card to a 6 port?

How difficult is it to do???

 

[silver987]

Turn the system down. Replace the 2 port with a 6 port and restart the system. All should come back.

http://www.silverlakecom.com

 

[lugerlover]

i guess for shits and giggles you would wanna do a backup

 

[phoneguy427]

Plug your first trunk module in top port (8) and second trunk in (7) or your line numbers will be all messed up. Start your station modules on the bottom (3).