MICS 5.0XC Rebooting

[RikRodgers]

I'm looking for a second opinion here...

I've got a customer with a MICS 5.0 XC (no PRI, all pots)and NAM 4.0.04C. A couple of days ago, it started rebooting intermittently.

The massive UPS we've got on it looks ok, and is only carrying a 12% load.

I'm getting some unusual error codes, though:

Event 680-01 S9 (wireless system disabled), and UTAM Codes required- There's no companion on the system.
Alarms 51-02, 51-06, 51-07, and 51-08.
And the one that scares me most- Evt 462-0011020100 S4 (system shrinkage, corrupted data set to default)

Each of these have repeated sometime near the reported reboot.

I don't mind replacing hardware, but the thought of having to run Setup, and reprogramming 100+ extensions and MB's is going to give me nightmares tonight.

Anyone got an idea where to start?

 

[curlycord]

Somethings to try in no order...
-backup then restore
-power down, reseat all cards
-Replace exp cards
-Replace Trunk Modules/s
-Relace line cards

Otherwise I think the worst on this one and Startup required.







=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[RikRodgers]

Thanks, curly.

I'll try your other ideas first. I'm keeping my fingers crossed.