phoneguy2286
Vendor
Scenerio:
MICS 4.1 with PRI for local access, and a point-to-point T1 tied to a MICS 5.0. I know you can't use one NAM, so there are 2 (one at each location). I have the 4 digit dialing set up at both locations, and the dialing plan works great, also the second location can dial 9 and grab local trunks for outgoing calls at the first location. I have a spare set of DID's on the PRI circuit (out of the range of extension numbers), and the calls come in fine. I would like to route these calls across the T1, to the second system. I did it in the test area (with both systems tied together with a cross-over cable. However, in the real world, the only way I can make ONE call get across the T1, is to set up a route with the full 4 digit DID number in it, and the dest code with the first digit <any>, and absorbe length to all:
DID at site 1 8000-8099
DID at site 2 3900-3999
route 004 outdial 3900, using pool A
dest code 3 * absorb ALL, use route 004
T1 cards are both in slot 2, E&M, auto answer, no DISA, Wink Start
Any tips, or help would be appreciated.
MICS 4.1 with PRI for local access, and a point-to-point T1 tied to a MICS 5.0. I know you can't use one NAM, so there are 2 (one at each location). I have the 4 digit dialing set up at both locations, and the dialing plan works great, also the second location can dial 9 and grab local trunks for outgoing calls at the first location. I have a spare set of DID's on the PRI circuit (out of the range of extension numbers), and the calls come in fine. I would like to route these calls across the T1, to the second system. I did it in the test area (with both systems tied together with a cross-over cable. However, in the real world, the only way I can make ONE call get across the T1, is to set up a route with the full 4 digit DID number in it, and the dest code with the first digit <any>, and absorbe length to all:
DID at site 1 8000-8099
DID at site 2 3900-3999
route 004 outdial 3900, using pool A
dest code 3 * absorb ALL, use route 004
T1 cards are both in slot 2, E&M, auto answer, no DISA, Wink Start
Any tips, or help would be appreciated.
