Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MICS 4.1, what kind of VM module can I set up?

Status
Not open for further replies.

Gem257

Programmer
Jun 9, 2009
34
US
Hi all,

I have a MICS 4.1 with no voicemail, the sys version is 30NcG15 NAT, and I'd like to know what kind (if any) of norstar voicemail can I set up here. There has never been a voicemail module on this system. Is it a keycoded feature and how can I tell how many ports we would get from a given unit?

We have a warehouse with overstock Norstar parts. I have access to the following:
NORSTAR FLSH VM 2.0 MDL 2 ENG, part 595551.
NORSTAR FLASH 2.0 MDL 2, part NT5B07AABE
NORSTAR VOICEMAIL SYS. APPLICATION MODULE, part NT5B74AABJ

These part names/numbers came from a master list I was provided.
 
You need at minimum or above:
NAM 4.1 (can have 2 to 16 channels)
Startalk Flash 1.9 (can have 2 or 4 channels)

How to check version - F983, log in and press 9
How to check codes/mailboxes - F983, log in and press 44
How to check channels on a NAM - Log into F915

Looks like your NAM might be 4.0

________________________________________

Add me to LinkedIN

**New Allworx Forum**

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
My chart shows NAM 4.0 compatibility ends at 5.0. You need 4.1 when you reach MICS 6.x and above.

Marv ccna

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top