MICS 4.1 PRI problem after power a power cycle

[gsxr1000]

After power failure the mics I have looses the route info. I have to go to route001 and tell it to use pri-a every time power goes out. It has a ups so I don't see it that often. But, what do i need to do and how to do it to fix this.

 

[MarvO1]

You might try building a complete new route, to replace route 001 with some other route number. I did see this problem once, and I think that is what I did. Thought I had notes on it, but ?????????????? can't find the notes.

MarvO said it

 

[mroberts]

If that is the only thing you are losing count yourself lucky. By default the routes are set to regular pool-A. It's just going back to that. Programming is held in both the capacitor in the cartridge as well as the capacitor on the motherboard inside the KSU. One or both of those may be going but as you said, the UPS should keep it up and running.

Is the system EVER losing power itself or is the UPS keeping it up? If it doesn't lose power, it won't lose programming. If it is actually resetting I would look at my UPS and find out why it's not holding it up.

MRoberts
mroberts@americaii.com

http://www.a1teletronics.com