MICS 2.0 with a NAM 1

[DTone]

Hey out there I know you guys have all the answers, so could you help with this:

Norstar 0X32 with MICS 2.0 and 1-6 Port expantion card for 5 Station Mod and 1 analog station Mod. They wanted me to Install 1 More Station Mod. when I put the new expantion card in and powered the system up, it put all phones into Maintenance and the Phones Reset every minute or so and gos back into maintenance (Keeps Repeating this cycle) the problem is that they also want a NAM installed on the system so I do need the other Expantion card. Is an Up-Grade in my future as I am stuck on this one.
Any Help on this is apperciated. Thanks KDB

 

[samh30]

If you want to add another 6 or 2 port fiber expansion you have to upgrade your s/w to XC s/w.without that your system will only support 1 expansion card.Thats why when add another expansion in slot no 1 ,the system goes into maintenance mode.I hope that help. Good Luck!

http://www.samhassan.com