I have a Firebox X700 as my security appliance on one of my customers networks. in the face of some management opposition, mainly to installing MUVPN client software on machines they want to use the standard windows PPTP client and pass the VPN tunnel through the firebox to terminate on a Windows Server 2003 box running routing and remote access. I have the server configured fine, I can connect and run a VPN to it with no hassle at all. The problem I'm having is with passing it through the X700 with NAT. They have Private IP addressing inside the network and are using the X700 to perform NAT. I need some advice on how to pass the VPN traffic through the X700, I'm having trouble getting the NAT configuration I think. Any ideas would be really helpful. Many thanks in advance.