When swapping a ws5 and running CAL terminal reboots while loading files and never fully loads ops? Thoughts? Have tried couple different CF cards with same results. Thanks
I also have seen this similar issue where the CF card was pushed too far into the slot (I think from the factory). CAL would only download some of the files but started focusing on the CF card when I ran WCF and formatted the card but then noticed on reboot that some of the files were still there. Long story short, you may be able to format the CF card on a computer and still re-use the card.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.