Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Micros KDS WIPE (reset Controller)

Status
Not open for further replies.

mrmicros

IS-IT--Management
Jul 5, 2006
138
CA
have a calibration issue on touch screen.

need to exit ops to get to desktop.

Clrt alt del not working (will try another kb)

kds load too fast to get to and run elo cal software.

in ops right click on mouse does not work. mouse to use to click to clear checks does not work.

so want to be able to wipe controller and be able to start fresh at desktop and then re-cal to load ops.

thanks
 
Or try disabling CAL option when it loads up.
Do your calibration.
Restart CAL.
 
Can you hit the winkey to get the start menu, then get to control panel? From there:
Save Settings Icon, Default settings tab, check the reset box and hit ok.
This is like doing a wcf on a ws4/5
 
Win key does not work either. two different keyboards tried. options listed all work on another kds unit.
No spillage or liquid near unit.

So no way to do a factory reset? Thanks
 
Nope it like none of the usb ports work
Just swapped out and spare unit and all works Kb and mouse as it should.

Could send in for repair but probably cheaper to pu a used unit.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top