Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Micros e7 export db from 4.1 to 4.0??

Status
Not open for further replies.

mrmicros

IS-IT--Management
Jul 5, 2006
138
CA
ok have a db that was programmed on a ver4.1 now if we try to use this to update a site with ws5A and ver4.0 it comes up with incompatible error on bootup.
So can the 4.1 db files be extracted from 4.1 and imported into 4.o or are we doing separate programming.

i know you can go from older version to newer to upgrade but this menu was done on 4.1

Can 4.1 be installed on a ws5a and work with the usb license key?

Thanks for any input.
 
Image-1_briilv.jpg
Image_bqbzkg.jpg


So interesting update.
in congif in workstations and office ver4.0 had the option for the new keyless code option for licensing
as seen in pic BUT it will still work with the usb license keys.

Ver4.1 had this box to aggrege to license terms. No option to even enter a code and does not work usb license key. try to run a report and you get the "key not found 7days blah blah"

Check the agree to terms and its fully functional. on both PC and workstation.

This will save a good 6-8 hrs reprograming a new menu in 4.0 BUT I'm worried if this dose not pop up with a
expiry in 30 days or something? even though there is no option to even enter licensing codes.

And of course the original RMF doc says nothing.

Input welcomed. thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top