Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Micros autosequences and reports not displaying information

Status
Not open for further replies.

f4rid

IS-IT--Management
Mar 7, 2017
108
VE
Hey guys, I'm having an issue with autosequences and reports, sometimes it displays a blank screen, sometimes a gray screen.

On the other side, Report explorer runs perfectly so I have no idea what could be the problem.

I reinstalled Adobe Reader, repaired with 5.7 PreReq and still have the same issues.

Does any of you had this problem and found the solution?

The server is running Windows 7 64bits and Micros RES 3700 5.7.MR3.HF4.

I'll attach an screenshot how it looks atm:

Autosequence_lqtxtn.png


Thanks a lot!
 
Is your autsequence service actually starting? There is an issue it does not always. A script out there to re-register the auto sequence service for 5.6 and 5.7
 
Hi Wildbar!

It seems like it is running. I stopped the service and started it again, still nothing.

Here's the screenshot of the services windows:
ss2_zkpdfc.png
 
Try this:

1. kill the Autoseqserv.exe from taskmanager
2. run - cmd - iisreset
3. Services.msc
Restart - Micros Autoseq service
Restart - Micros remoting service
Restart - worldwideweb publishing service
4. Test the report

If this does not solve your issue end the reportexporter prosess in taskmanager

 
Heya all, thanks a lot for the help, I tried everything that you guys told me.

The solution was to backup the database, did a fresh install and it worked out.

Thanks a lot!
 
Did you try the script to register the auto sequence server? Saves time on a full reinstall
 
Hey Wildbar!

Which script? I tried what m3700 told me, but it didn't work.

It was easier to reinstall since it was a fresh installation.

Btw, is there any chance that you can share the latest micros patch? 5.7.6 I believe it is.

Thanks a lot!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top