Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Micollab Mobile Client on server 8.1.2.103 can't answer 3th party SIP (intercom) call is dropped

Status
Not open for further replies.

rclements1

Technical User
Mar 30, 2006
21
NL
MiCollab softphone answers a call and connection is dropped instantly.
WR trace shows 488 not acceptable from the intercom
Invite is g711a and in a second attempt even all codecs (g7221 G722 g711a g711u and f729) (unrestricted codecs on the MBG V10.1.0.264
and Prack is enabled)

you can state the intercom has a codec problem but when I register a 3th party Zoiper on the same BMG the call is accepted and speech is there to and from the intercom

Feedbacklog from the client : Warning: 305 "Incompatible media format"

anyone with an idea ?
 
so is this a call from the SIp intercom to a Micollab softphone
might be an issue setting up a speech path
would be helpful to see the trace

If I never did anything I'd never done before , I'd never do anything.....

 
Call_evlw74.jpg


this is a part of the trace showing SDP options and codecs
 
does the intercom support video ?

check the SDC for the intercom
- Assign your SIP device to use a SIP Dev Capabilities other than 71
- You can copy SIP dev 71 to another one,
Set the following option in the SIP device capabilities
Allow Device To Use Multiple Active M-Lines to YES

there is a KMS article | Troubleshooting the 488 Not Acceptable SIP Message on MiVB Document ID HO4495




If I never did anything I'd never done before , I'd never do anything.....

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top