Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MGS is restarted

Status
Not open for further replies.

amyygt

Programmer
Sep 8, 2005
72
US
Today CPMGS on your screen stopped working.
Both restart to delete the file appears in the FPGA and serial port the following information.

Found device : INTEL 82365SL
Engcode: NTDW59BAE6 REL 02
ELAN mac address is: cc:f9:54:ec:09:40
TLAN mac address is: cc:f9:54:ec:09:3f
RESET reason: MSP430 Hard Reset.
Daughter board: 128 ports cc:f9:54:ec:09:41.
FPGA PCI bus inaccessible
PCI test: Failed !

Power up self test failed,status = 40


Anyone know how I can reinstall this file to the card FPGA
 
I had the same thing happen and I had to send the card out to be repaired...i repalced hard drive to see if that was it and still same thing....I have had nothing but issues with these cards .... sent 3 for one install and all three ended up blowing up with in 2 months....not sure if a bad batch was sent out because such a demand on them
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top