Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MGC problem

Status
Not open for further replies.

FrankIPnett

Vendor
Feb 20, 2007
3
DK
Hi

I have a problem with a MGC in RLS. 5.0. It keeps loosing the link and i get an Error in the display on the MGC - 0003. And get the following message om the serviceport
-
Auto commit option has been enabled.
Upgrade of CSP loadware initiated.
OMM: IP link is UP between Primary Call Server and MGC 4
OMM: IP link is DOWN between Primary Call Server and MGC 4
Upgrade of MSP loadware initiated.
OMM: IP link is UP between Primary Call Server and MGC 4
STARTUP: Cabinet 4 registration denied: Call Server has cleaned up resources.
reboot(-1) has been called...

NAME ENTRY TID PRI STATUS PC SP ERRNO DELAY
---------- ------------ -------- --- ---------- -------- -------- ------- -----
tRegCab registerCabi 86e0191c 65 READY 803387a0 86e01700 d0003 0

Can any one tell me what might be the problem ??

Thanks

Frank
 
Hi,
I have got the problem too, you need to download the new loadware of MGC card from nortel site, then copy and install the loadware to call server under the debug mode. the loadware path located at /u/loadware . finally need to upgrade your mgc card loadware from call server one by one.
good luck
mancy

example as below:
pdt> lwload mgcxxxx.lw
lwinst xx <--- handle number

---------------------------------
LD 143
.upgmg ss ll

.upgmg stat <-- get status

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top