Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MGC Loadware Update

Status
Not open for further replies.

emam20

Technical User
Jun 11, 2009
16
DZ
Hi Every One,
Any one installed this loadware version in MGC before?if yes.did you face any problem with this version?

(DSP1AB01,DSP2AB01,MGCAAA05,MGCBAH09,MGCCAM06,MGCFAA14,
MGCMAA07).

I used the loadware comparison tool and get the delta file.
(T1E1AA19.LW)
how can i install it?
could you please help me.

Thanks,
Emam20
 
Hi All,
Any one has any info about the above issue.
Thanks,
Emam20
 
Loadware CAM06 is the version we want! We are still on CAM03 and we are working with our vendor to get CAM06.
Sorry I can't help you out on installing it.
 
Can you contact any one to send me how can i install it through the element manager??
as i have many remote sites and want to update those firmware to those sites.

Thanks In Advance,
Emam20
 
Our vendors usually use command line ... I am more GUI friendly, but I am slowly learning Element Manager. It would appear that you can just click on Software under system (file tree) - your expanded options will be:
Call Server PEPs
Media Gateway PEPs
Loadware PEPs
File Upload
etc... so click on File Upload and the screen should show you what is currently on your devices. Under that section you have a LW/FW file name browse field. So, I would imagine you just locate that on your drive and then press the file upload button. You would have to be careful of any 'special instructions' included with the loadware. So that would get it uploaded to your system. From there I am not quite sure how to 'install' it. Maybe just a reboot would suffice ... you can also check out Servers/Media Cards PEPs ... that is about as much 'help' as I can offer. Someone else on this forum will have to assist further.
 
you will need access to PDT

Copy or receive file to /u/loadware
once file in loadware folder:

lwload "filename" <- this will load and give you a handle number

lwisnt "lwhandle"

will probably ask how you want firmware distributed to MGCs and if you want to upgrade now. When MGC finishes upgrade, it will reboot.


do a lwstat to show status of loadware

 
Nice Reusser! Yea my vendor was telling me to use lwload/lwinst thanks for spelling it out with proper syntax.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top