MGC LOAD Problem - Need Advice

[PMMrMan]

OK.

I have an MGC card on my Lab switch that seems to need a new Gold Image uploaded to it.

My problem is that the Gold Image on the card seems corrupted so when I try to load from Goal Image it gets stuck.

This is the Output.

Loading Gold MSP image...

Booting ARM0 (MSP) at 000x00000100 ...
Loading Gold CSP image ...

Booting ARM1 (CSP) at 000x80010000 ...

Q


Any ideas. I can't boot the MGC to do any kind of configuration.

Thanks

 

[scotthdiv]

I've run in to two exactly like that - they both quit at that "Q". They were considered "OBF", so we just replaced them with new ones.


I'd love to hear of an onsite solution...

 

[PMMrMan]

This MGC worked for about a month or two. We had a connectivity issue and the engineer decided to wipe out all config info and reboot from the Gold Image. Normally an acceptable practice but the Gold image seems messed up. I wish I could just upload a new gold image to this card but I can't seem to talk to the card.

I think I still have a workable image on the RMD but I'm not sure.